Home > DIY Playthings > Nipple Press

Nipple Press

Ever wanted to make your own nipple clamps? Well, this is not exactly a clamp rather a press. All you need is about 1 m of spring steel rod with a diameter of 1.5 mm cut into 4 pieces.

To adjust the pressure on the nipple you need two rings each. Mine were made of a small piece of Ø 8 mm rubber lace I had laying around. Just punch a hole into each rubber piece and slide them on. The ends of each pair are covert with a small piece of heat shrinkable tube.

Simple, yet effective!

Categories: DIY Playthings Tags:
  1. Rick
    March 29, 2011 at 03:34

    This looks great almost like tweezer clamps..which SECTION did you find THESE in Home Depot? I am not sure what you used for the rubber section? Thanks..

    • elims
      February 6, 2012 at 22:34

      I’m not sure if Home Depot carries any of the items you need for this. I got the spring steel rod and the rubber from a shop which carries items for building RC-models.

  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: